UGT SMT-100 Soil moisture probe
UGT SMT-100 Soil moisture probe
Compact, functional and robust: The SMT-100 combines the advantages of a cost-effective FDR sensor system with the accuracy of a TDR. As standard, we deliver the sensor in a practical carrying case set with a reader for mobile measurement of volumetric soil moisture and soil temperature. However, you can also order the SMT-100 separately either as an analog version with different voltage ranges or with a digital interface.
What can the SMT-100 do?
The sensor determines volumetric water content and temperature. It has a wide measuring range, is maintenance-free and frost-proof. With a fast response time and low sensitivity to salty soils, it is well suited for long observation periods. In addition to water content and temperature, the relative dielectric constant can also be output.
As with a TDR, the transit time of a signal is obtained to determine the relative dielectric constant εr of the soil. And, as with an FDR, εr is converted to an easily measured frequency. However, unlike other FDRs, this sensor is not based on capacitance measurement using a capacitor, but uses a ring oscillator to convert the signal propagation time into a frequency. The frequency used (>100MHz) is high enough to ensure a good function even in clayey soils.
How is the SMT-100 constructed?
The design is based on an integrated circuit board, which brings economic advantages. The blade shape simplifies installation in the ground. The housing and cable are sealed to be waterproof. Data processing and storage works via an external logger. The SMT-100 is bus compatible, so you can connect multiple devices to one logger.
|
Parameters |
Specifications |
||||
|
SMT-100 digital |
SMT-100 analog |
||||
|
Total length |
Approx. 182 mm |
||||
|
Printed Circuit Board L x W x T |
Approx. 113 x 30 x 1.6 mm |
||||
|
Cable length |
10 m (connection cable can be customized) |
||||
|
Cable Material |
Extremely durable polyurethane (PUR), notch-resistant |
||||
|
Weight, including 10 m of cable |
Approx. 255 g |
||||
|
Soil moisture |
|||||
|
Measurement Methods |
Based on TDT (Time Domain Transmission) |
||||
|
Measurement Signal |
Aymmetrical, bipolar differential |
||||
|
Output Signal: Humidity and Temperature |
Linear |
||||
|
Measurement Range |
0 … 60% by volume (0 … 100% by volume with limited accuracy) |
||||
|
Accuracy in Generic Calibration |
±3% vol. in mineral soils with an average salt content of 0 to 50% vol. |
||||
|
Accuracy after specific calibration |
±1% by volume |
||||
|
Resolution |
0.1% vol |
||||
|
Ambient temperature |
0 … +80 °C / +60 °C |
||||
|
Temperature |
|||||
|
Measurement range (extended temperature range available upon request) |
-40 ... +80 °C |
-40 ... +60 °C |
|||
|
Accuracy |
±0.2 °C |
±0.8 °C |
|||
|
Resolution |
0.01 °C |
0.2 °C |
|||
|
Interface / Power Supply |
|||||
|
Interface / Signal Output |
RS485 |
SDI-12 |
0 … 1 V |
0 … 10 V |
4 … 20 mA |
|
Supply Voltage |
4 ... 24 VDC |
4 ... 24 V DC |
12 … 24 V DC |
12 … 28 V DC |
|
|
Current Consumption in Sleep Mode |
Approx. 5.3 mA |
Approx. 0.8 mA |
Approx. 4.8 mA |
||
|
Current Consumption: Peak Current (typical measurement duration: 10 s) |
Approx. 5.3 mA |
Approx. 13 mA |
Approx. 20 mA |
||
|
Communication Protocols |
UGTBus, Modbus RTU, ASCII, TBus |
SDI-12 |
|||
|
Time until the output voltage stabilizes |
<500 ms after power is applied |
||||
|
Additional Measurement Values |
Epsilon, supply voltage |
||||
|
Internal measurement interval |
About 1 measurement per second |
||||
|
Analog Output Resistance |
<100 Ohm |
||||